Table of Contents
Advertisement
1.2.1 User Mode
Select Driving Mode:
You have an option to choose the positioner's movement
type: Continuous, Step or Time.
Position the antenna with north, south, east and west and
use the
/ ,
west,
key drives to east,
key drives to south.
If you finished driving of motor, select "Store current
Position." and press
N N o o t t e e
:
The level indicated in the "Signal Status" is only for reference.
The signal quality may be adequate even though the level indicated is
not maximum.
Go to Stored Position.
When the stored position is reached then screen displays "Stop",
you can now continue with the further operations.
Select the Calculate Sat Positions to recalculate the satellite position and
1.2.2 Installer Mode
After checking the positioner's state, installer should use this
menu. He should set the "Disable Limits" before using User
mode.
Select the Drive Motor West/East and use the
keys to drive motor.
key drives to west and
Select "Enable Limit", in order to enable "Set Limit".
Select "Disable Limit", in order to disable "Set Limit".
Select "Reset Positioner" and
L
I
T
E
R
E
/
key to drive motor.
key drives to north and
key, to reset new driving motor.
key drives to east.
C
E
I
V
E
R
OPERATING THE RECEIVER
key drives to
/
key to reset positioner.
GB-17
key.
Advertisement
Table of Contents
