Setup Menu - Sony DST-HD500 Operating Manual

Setup menu

Setup menu
Setup
Video / Audio Setup
Time Setup NSW/ACT
Restore to Default
S/W Update
Information
Select : Confirm : BACK :
16:9 (Full Screen)
4:3 (Full Screen Crop)
4:3 (Letter Box)
The Setup menu allows you change various settings.
1 Press the MENU button to display the menu system.
2 Press the v button to highlight the
OK button to display the Setup menu.
Video/Audio Setup
This option enables you to enjoy video and audio in various
environments.
With the Video/Audio Setup option highlighted, press the b or OK
EXIT : button to adjust. Press the V or v buttons to highlight the required
setting (refer to table below). Press the OK button to adjust.
Video Format
Aspect Ratio
Audio Output
Control
MPEG Volume
Control
Using the menu system
This option allows you to set the picture quality.
With the Video Format option highlighted, press
the b or OK button to adjust. Press the V or v
buttons to '1080i', '720p', '576p' or '576i'. Press
the OK button to confirm.
Note: If you have a high definition screen we
recommend that you select the '1080i' setting. If you
have a standard definition screen it is likely that the
'576i' setting is the only setting suitable for your display.
Please check the specification of your TV or display
screen by referring to the manufacturer's instruction
manual.
Alternatively, in normal operation, press the
button on the remote control to cycle through all
the settings until the best quality display is seen.
Note:When the video format is changed, the picture
might be slightly disturbed during the transition between
video formats. This does not indicate a malfunction.
This option allows you to set the aspect ratio.
With the Aspect Ratio option highlighted, press
the b or OK button to adjust. Press the V or v
buttons to '16:9 (Full Screen)', '4:3 (Full Screen
Crop)', or '4:3 (Letter Box)'. Press the OK button
to confirm.
Note: '16:9 (Full Screen)' is for use with a widescreen
TV/display screen.
'4:3 (Full Screen Crop) is for use with a non-widescreen
TV/display screen. The picture is stretched to fill the
screen. As a result, some of the picture may not be
visible.
'4:3 (Letter Box) is for use with a non-widescreen TV/
display screen. The full picture is shown with black bars
at the top and bottom of the picture.
This option allows you to set the priority for audio
output (when Dolby Digital and MPEG audio are
available).
With the Audio Output Control option
highlighted, press the b or OK button to adjust.
Press the V or v buttons to 'Dolby Digital', or
'MPEG'. Press the OK button to confirm.
This option allows you to adjust MPEG audio
level to Dolby Digital audio level.
With the MPEG Volume Control option
highlighted, press the b or OK button. Press the
B or b buttons to adjust the audio level. Press the
OK button to confirm.
Using the menu system
symbol. Press the b or
continued...
15