Projecting; Projecting The Picture On The Screen - Sony VPL-VW50 Operating Instructions Manual

Projecting

This section describes how to operate the projector to view the picture from the equipment
connected to the projector. It also describes how to adjust the quality of the picture to suit
your taste.

Projecting the Picture on the Screen

LIGHT INPUT
DYNAMIC STANDARD CINEMA
To view the picture from
Video equipment connected to the VIDEO INPUT connector
Video equipment connected to S VIDEO INPUT connector
Component equipment connected to Y/C
RGB/component equipment connected to the INPUT A connector
Equipment connected to the HDMI1 connector
Equipment connected to the HDMI2 connector
* Set the "Input-A Signal Sel." setting in the Setup
you set it to "Auto," and cannot display the picture properly, select an appropriate signal according
to the input signal. (1 page 48, 52)
Tip
When "Auto Input Search" is set to "On" in the Function
signals is automatically displayed by pressing INPUT.
28
1
Power on both the equipment
and the device connected to the
equipment.
2
Press INPUT repeatedly to
select the input you want to
project on the screen.
Display the indication of the input you
want.
Example: To view the picture from
/P /C /P on the projector Component
B B R R
menu according to the signal input. When
menu, the input terminal with effective
the video equipment
connected to the
VIDEO INPUT connector.
Press INPUT to display
Video
S-Video
Input-A*
HDMI1
HDMI2