First Time Operation; Switching On The Projection Tv And Automatically Tuning - Sony KP-44PX2 Instruction Manual

Switching On the Projection TV and Automatically Tuning

The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language
of the menu screen, 2) choose the country in which you wish to operate the TV, 3) search and store all available channels (TV
Broadcast) and 4) change the order in which the channels (TV Broadcast) appear on the screen.
However, if you need to change any of these settings at a later date, you can do that by selecting the appropriate option in
the (Set Up menu) or by pressing the Auto Start Up Button
1
Connect the Projection TV plug to the mains socket (220-240V AC, 50Hz)
The first time that the TV set is connected, it is usually turned on. If the TV is off, press
the on/off button on the TV set to turn on the TV.
The first time you switch on the TV, a Language menu displays automatically on the
TV screen.
2
Press the or button on the remote control to select the language, then press the
OK button to confirm your selection. From now on all the menus will appear in the
selected language.
3
The Country menu appears automatically on the TV screen. Press the
to select the country in which you will operate the TV set, then press the OK
button to confirm your selection.
• If the country in which you want to use the TV se does not appear in the list,
select "-" instead of a country.
• In order to avoid wrong teletext characters for Cyrillic languages we
recommend to select Russia country in the case that your own country does not
appear in the list.
4
The Auto Tuning menu appears on the screen. Press the
5
The projection TV starts to automatically search and store all available broadcast
channels for you.
This procedure could take some minutes. Please be patient and do not press
any buttons, otherwise automatic tuning will not be completed.
In some countries the TV Broadcaster installs the channels automatically (ACI
system). In this case, the TV Broadcaster sends a menu in which you can select
your city by pressing the
If no channels were found during the auto tuning process then a new menu
appears automatically on the screen asking you to connect the aerial. Please
connect the aerial (see page 7) and press OK. The auto tuning process will start
again.
8

First Time Operation

OK button to select Yes.
or button and OK to store the channels.
/ on the TV set.
Language
English
Norge
Français
Italiano
Nederlans
Select Language:
Select Language:
or button
Select Language:
Programme:
Channel:
System
Language
English
Norge
Français
Italiano
Nederlans
Select Language: Confirm: OK
Confirm: OK
Language
English
Norge
Français
Italiano
Nederlans
Confirm: OK
Country
Sverige
Norge
-
Italia
Schweiz/Suisse/Svizzera
Confirm: OK
Do you want to start
automatic tuning?
Yes
No
Auto Tuning
1
C 01
B/G
Searching...
No channel found
Please connect aerial
Confirm
continued...