Adjusting The Interior Fittings; Moving The Shelves; Split Shelf; Adjusting The Door Shelf / Bottle Shelf - Miele K 12010 S-2 Operating And Installation Instructions

Moving the shelves

The shelves can be adjusted according
to the height of the food.
 Raise the shelf, and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The raised edge on the protective strip
at the back must face upwards to pre-
vent food from touching the back of the
appliance and freezing to it.
Stoppers prevent the shelves from be-
ing dislodged by mistake.

Adjusting the interior fittings

Split shelf

(depending on model)
In order to accommodate tall items in
the appliance, such as tall bottles or
containers, one of the shelves is di-
vided. The front section can be pushed
carefully under the rear section.
 Push the rear half of the glass shelf
slightly upwards.
 With the rear half pushed up, lift the
front half of the glass shelf up slightly
at the front, then slide it carefully un-
derneath the rear half.
Adjusting the door shelf /
bottle shelf
 Push the door/bottle shelf upwards,
then remove it by pulling it forwards
 Replace the door/bottle shelf at the
required position. Ensure that it is se-
curely pushed back into position.
25