Customer Service Mode; How To Exit The Factory Mode; Purpose - Philips 22PFT4031/12 Service Manual

Service Modes, Error Codes, and Fault Finding
Item Item value
15 VIRGING_MODE
16 E_Fuse
17 ORT_MODE
18 AGEING MODE
19 AUD_LIMITE_MODE
20 AUD_THRESHOLD_BYTE1
21 AUD_THRESHOLD_BYTE2
22 AUD_THRESHOLD_BYTE3
23 AUD_GAIN_LINEIN
24 AUD_GAIN_HDMI
25 AUD_GAIN_ATV
26 AUD_GAIN_DTV
27 AUD_GAIN_USB
28 TUNER_ID
29 CIPLUS QUERY
30 CIPLUS UPDATE
31 CI Key Type Selection
32 AQ_TABLE_INDEX
33 EDID UPDATE
34 LVDS SSC Ratio
35 LVDS SSC Freq
36 DDR MU0 SSC Ratio
37 DDR MU0 SSC Freq
38 DDR MU1 SSC Ratio
39 DDR MU1 SSC Freq
40 Panel H.Flip
41 Panel V.Flip
42 Panel ABSwap
43 Watchdog
44 Backlight PWM freq.(Hz)
45 Backlight PWM Limit
46 VGA_TxRx_Mode
47 LVDS Driving
48 LVDS Format
49 Ziggo Aging
50 SPDIF
51 Standard PWM Gain
52 ECO PWM Gain
53 VGA port
54 Zero Detect Enable
55 Copy PQ table to TV
56 Copy AQ table to TV
57 Headphone
58 EnhancedH/88
59 Joysticker Enable
60 Satellite Tuner Slave Address
61 Ambilight Enable
62 Lounge Light Enable
63 FRC F/W Upgrade
64 912_SSC_LVDS_PERCENT
65 912_SSC_LVDS_FREQ
66 912_LVDS_DRIVING
67 912_LVDS_FORMAT
68 Blue Tooth
69 Freeview-HD
70 Certification Bit Enable
71 EXIF_FACTORY

How to Exit the Factory mode

Use one of the following methods:
• Select EXIT_FACTORY from the menu and press the "OK"
button.
Note: When the TV is switched "off" by a power interrupt, or
normal switch to "stand-by" while in the factory mode, the TV
will show up in "normal operation mode" as soon as the power
is supplied again. The error buffer will not be cleared.
Default value
22" 24" 32" 43"
off
on
off
off
1 1 1 1
100 100 100 100
200 200 200 200
100 100 100 100
0
0
0
0
0
0
Press OK
Press OK
ProductKey
6 7 2 4
Press OK
4% 5% 5% 5%
30KHz 30KHz 30KHz 30KHz
0.3% 0.3% 0.3% 0.3%
30KHz 30KHz 30KHz 30KHz
0.2% 0.2% 0.2% 0.2%
off SSC
on on off off
on on off off
off off off off
5sec 5sec 5sec 5sec
5sec 5sec 150 150
150 150 20 20
20 20 off off
off off 2 2
VESA 8bit Jeida 8bit VESA 8bit VESA 8bit Jeida 8bit LVDS Format
Press OK
On On On On
100 100 100 100
100 100 100 100
on on Off Off
on on on On
Press OK
Press OK
on on on On
on on on on
Off Off on On
Auto Auto Auto Auto
Off Off Off Off
Off Off Off Off
Press OK
0
0
0
JEDIA 8bit
Off
on Off Off Off
Off
Press OK
back to
div. table
TPN16.3E LA
49" Description
Use this to return the set to virgin mode. Depends whether the set has been used
already.
E-fuse mode
ORT mode
Use this for aging a new LCD panel
1 Three modes,0: off, 1: adaptive mode, 2: fixed mode
100 Limit threshold
200 Limit threshold
100 Limit threshold
Line-in audio gain
HDMI audio gain
Analogue TV audio gain
Digital TV audio gain
USB audio gain
Displays and changes the Tuner ID with the left and right cursor. Not to be changed
when the tuner is replaced with the correct service part.
Shows the Validity of the CI+ key and the supplier information
Used to enter a new CI+ code into the NVM. This can only be used when no CI+
code exists in the NVM
CI Key Type Selection
10 Audio Quality index
Used to enter a new EDID codes into the NVM
3% LVDS SSC ratio
30KHz LVDS SSC frequency
0.3% DDR MU0 SSC ratio
30KHz DDR MU0 SSC frequency
0.2% DDR MU1 SSC ratio
DDR MU1 SSC frequency
on Flip panel
on Flip panel
off ABSwap panel
5sec Watchdog
150 Backlight PWM frequency
20 Backlight PWM Limit
off VGA_TxRx_Mode
3 LVDS Driving
Ziggo Aging
On Enable/Disable SPDIF source
100 Standard PWM Gain
100 ECO PWM Gain
Off Enable/Disable VGA port
On Zero Detect Enable
Copy PQ table to TV
Copy AQ table to TV
On Enable/Disable Headphone source
On EnhancedH/88
On Joysticker Enable
0xC6 TUNER Address
Off Ambilight Enable
Off Lounge Light Enable
FRC F/W Upgrade
Percent of 912_SSC_LVDS
912_SSC_LVDS_FREQ
912_LVDS_DRIVING
The format for 912_LVDS
Blue Tooth
Off Freeview-HD
Certification Bit Enable
Exits the Factory mode
5.1.4 Customer Service Mode (CSM)

Purpose

The Customer Service Mode shows error codes and
information on the TVs operation settings.The call centre can
instruct the customer (by telephone) to enter CSM in order to
identify the status of the set.This helps the call centre to
diagnose problems and failures in the TV set before making a
service call.
The CSM is a read-only mode; therefore, modifications are not
possible in this mode.
5. EN 23
2016-Oct-28