Charging Directly On The Player; Checking The Remaining Power Of The Battery - Sony WALKMAN D-VE7000S Operating Instructions Manual

Charging directly on the
player
1
Connect the AC power adaptor to
the player.
Charging starts and the
in orange first, and then remains lit.
to DC IN 12V
AC power adaptor
When the battery is completely charged,
the lamp turns red.
Charging time
Approximately 3 hours to charge an empty
battery up to full capacity.
20
lamp flashes
lamp
to an AC outlet
Checking the remaining
power of the battery
When you press DISPLAY on the remote, the
remaining power of the battery is indicated
on the screen as shown below ( page 37).
As the black indicator section decreases, the
remaining power is depleted further.
 
 "LOW BATTERY"
Notes
• The display shows the approximate battery power
remaining. One section does not always indicate
one-fourth of the battery power.
• Depending on the operating conditions, the display
may increase or decrease relative to the actual
power remaining.
• The remaining battery indicator appears only when
the player is operated on the battery.
• The remaining battery indicator does not appear,
while playing DivX files ( page 26), JPEG files
( page 29), and viewing external input signals
( page 50).
Battery life *
• When the battery is fully charged
Approximately 3 hours
• If the screen is turned off (  page 39)
Approximately 7 hours
* Measured value using the JEITA (Japan
Electronics and Information Technology Industries
Association).
Playing time shown is approximate hours, when
you use the player on a flat and stable surface.
This value varies depending on how the player
is used.
 