Setting The Function For Scanning Slowly At Low Resolution [Low-Speed Feed Mode] - Fujitsu fi-7800 Operator's Manual

Setting the Function for Scanning Slowly at Low Resolution [Low-speed Feed
Mode]
When scanning at low resolution (lower than 400 dpi), you can set a slow speed for scanning documents regardless
of the resolution that is set. This setting is effective for scanning long page documents.
1
Start up the Software Operation Panel.
Refer to Starting Up the Software Operation Panel (page
2
From the list on the left, select [Device Setting 2] → [Low-speed Feed Mode].
3
Select whether to enable or disable [Low-speed Feed Mode].
HINT
This setting can also be configured from the operator panel.
193).
248
Operational Settings