Listening to FM Radio
Setting the Reception
When you select stations using the "FM Auto Preset" function ( page 60) or
"Manual Tuning" ( page 61), the FM receiver may receive many unwanted
broadcast stations because the reception is too sensitive. In this case, set the
reception to "Scan Sens Low. " "Scan Sens High" is set by default.
Press and hold the
Press the / button to select
the button to confirm.
Press the / button to select "Scan Sens>," and then press
the button to confirm.
Press the / button to select "Scan Sens Low," and then
press the button to confirm.
To set the reception sensitivity back to the default
Select "Scan Sens High" in step
To return to the previous menu
Press the
(NW-E013F/E015F/E016F only)
/HOME button until the HOME menu appears.
/HOME button.
(Scan Sens)
/HOME button
button
/ button
(Settings), and then press
and press the button to confirm.