Phasors - GE 469 Instruction Manual

469
Motor Management Relay

Phasors

4–26
7. The following window will appear:
Change the color of each graph as desired, and select other options as required,
by checking the appropriate boxes. Click OK to store these graph attributes,
and to close the window.
8. The Waveform Capture window will reappear with the selected graph attributes
available for use.
The EnerVista 469 Setup software can be used to view the phasor diagram of three-
phase currents and voltages. The phasors are for: phase voltages Va, Vb, and Vc;
phase currents Ia, Ib, and Ic.
1. With the EnerVista 469 Setup software running and communications estab-
lished, open the Actual Values > Metering Data window, then click on the
Phasors tab.
2. The EnerVista 469 Setup software will display the following window:
http://www.GEindustrial.com/multilin
Advanced EnerVista 469 Setup Features
GE Multilin