Sony CXD5602 User Manual page 301


PWMn_PARAM register

PWMn_PARAM register

PWMn_EN register

PWMn_EN register
reference

PWMn_EN register

PWMn_UPDATE register

PWM_PASEn register
adjustment

PWM_PASExx register
255)

PWM_PASExx register
15)

PWM_PASEn register
prescaler

PWM_FUCN2 register
combining

PWM_FUNCSEL0 register
polarity

PWM_FUNC4 register
OR combining
Note: The PWMn_UPDATE must be written in any of the following cases.

When the PWM_CYCLE value is changed

To synchronize with other PWMs

To synchronize with the ADC
The following table shows the maximum and minimum setting range of the output for representative clock
settings.
PWMn_CYCLE field
PWMn_THRESH field
PWMn_EN field
PWM_SELLn field[2:0]
PWM_SELLn field[5:3]
PWMn_UPDATE field
PWM_DELAYn field
PWM_CNTENn field[15:8] ... sets the capture start position (from 3 to
PWM_CNTENn field[7:4]
PWM_CNTENn field[3:0]
PWM_SEL_DISm field
PWM_SEL_INVm field
PWM_SELm field
－301/1010－
CXD5602 User Manual
... sets the cycle
... sets the duty (L width)
... selects the permission of operation
... selects the ADC channel used as the
... selects the PWM used as the reference
... reflects the setting update
... selects the number of clocks for phase
... sets the number of captures (from 1 to
... sets the frequency division of the
... selects the PWM channels used for
... selects whether or not to invert the PWM
... "0" selects AND combining/"1" selects
*