Summary of Contents for Lawnba HEDGEBOT TC-G158 lead-acid
-
Page 1: User Manual
USER MANUAL Please read this manual carefully before use ROHS Please keep this manual for future reference... -
Page 3: Table Of Contents
CONTENTS 1. INTRODUCTION AND SAFETY 2. PRESENTATION 3. INSTALLATION 4. REMOTE CONTROL 5. USE 6. MAINTENANCE AND STORAGE 7.TROUBLE SHOOTING 8. EXPLODED VIEW... -
Page 4: Introduction And Safety
1. INTRODUCTION AND SAFETY 1. INTRODUCTION AND SAFETY 1. INTRODUCTION AND SAFETY 1. INTRODUCTION AND SAFETY 1. INTRODUCTION AND SAFETY 7 8 9 1.1 Introduction The products are manufactured by POWERDECAL HOLDINGS, LLC. 1. WARNING-this is a dangerous power tool. Use care when operating and follow all safety instructions and warnings. -
Page 5: Important Information
1. INTRODUCTION AND SAFETY - Inspect and clear the mowing area of all debris (toys, 4. Charging station symbol. tree branches, items of clothing, anything with a height less than 6cm) before operating the mower. CAUTION! - Never raise the mower or attempt to inspect the blades while the mower is operating. -
Page 6: Presentation
2. PRESENTATION 2. PRESENTATION This chapter contains information you should be aware of before installation. 2.1 What’s in box 1 Handle Stakes / 4pcs Home button Press this button, mower goes back Used for fix the charging station to 2 Bumper: to charging station. - Page 7 2. PRESENTATION 2.2 Function of TC-G158 - Two cutting modes - Lift sensor There are two cutting modes of the mower, go straight There are lift sensors located in the front wheel. and go circle (high efficiency). If the mower is lifted from ground, it will stop In Auto, mower selects cutting mode intelligently.
- Page 8 2. PRESENTATION 2.3 Technical date Model Functions: TC-G158 lead-acid TC-G158 lithium Mower technical data Mower can’t be started when charging station is out of power 21KGS Gross weight 18KGS Mower can’t be started when 18KGS Net weight 15KGS virtual wire has been cut 56*51*25cm(LWH) Mower size Intelligent lawn testing...
-
Page 9: Installation
3. INSTALLATION 3. INSTALLATION 3.3 Charging station installation This chapter describes how you to install this mower. Choose best installation place. Please make sure it is there Before starting the installation, read the previous flat water, magnetic interference or obstacle in the front of chapter. - Page 10 3. INSTALLATION - Bury virtual wire below grass and fasten it on 3.4 Virtual wire installation the ground with pegs, so that the mower should The virtual wire can be installed in one of the following not cut the wire. ways: Add pegs to pull the virtual wire - Securing the wire to the ground with pegs.
- Page 11 3. INSTALLATION - Use the virtual wire to isolate areas inside the working - Care must be taken not to create a corner sharper area by creating islands around obstacles that can shorter than 90 degrees when setting up virtual wire. not withstand a collision, for example, flower beds and A corner sharper less than 90...
- Page 12 3. INSTALLATION 3.5 Charging head installation. 2. Connect the charger with power supply. 3.Charging light on station in green: Non-recharging. charging light on station in red: recharging. WARNING The charger is not water-proof, it must be located on a place where is dry and ventilated. Virtual wire Connect the cut two ends of virtual wire to virtual wire 3.7 Virtual wire and charging...
-
Page 13: Remote Control
REMOTE CONTROL 5. USE 4. Remote control 5. USE IMPORTANT INFORMATION Indicator light. - Do not leave the mower to operate unattended if you ON/OFF button: To stop the mower. Press it, know that there are pets, children or people in the mower enters standby mode. -
Page 14: Maintenance And Storage
6. MAINTENANCE AND STORAGE 5. USE 6. Maintenance and storage 5.2 Starting the mower - During maintenance operations, use the individual 1. Turn the key switch on. protections indicated by the Manufacturer , 2. Clockwise rotate Emergency switch. especially when intervening on the blade. 3. - Page 15 6. MAINTENANCE AND STORAGE 6.4 Battery 9. Keep all nuts, bolts and screws tight to be sure the The battery is maintenance-free, but has a limited life appliance is in safe working condition. span of 1-3years. 10. Replace worn or damaged parts for safety. 11.
-
Page 16: Trouble Shooting
7. Trouble shooting 7. Trouble shooting Problem Solutions Possible reasons 1.Check the virtual wire light (colorless). After turn on the mower by key Be sure the virtual wire is connected and set operate patten, but 1.The virtual wire fails to send signals. to the charging station that is motion,... - Page 17 7. Trouble shooting Problem Solutions Possible reasons 1. On manual pattern, Mow on 1. Turn on the mower button. Mower drives but remote control has be turned off. 2. Send the mower to service station blade will not mow. 2. The cutting motor is broken. replace a new cutting motor.
-
Page 18: Exploded View
8. Exploded View 8.1 Mower Exploded View 8.2 Charging Station Exploded View 1.top cover 2.PCB 3.Power terminal 4.Virtual wire terminal 5.Underpan 6.Copper sheet 7.Copper sheet permanent seat - 15 -... - Page 20 USER MANUAL...