Table of Contents
Advertisement
Permissions
Permissions may also be customised for an individual user, their permissions can be
changed to become a customised user. However for global access restrictions, the user
must be allocated a security level of Engineer, Supervisor, Technician or Operator, even
though the individual permissions will differ.
First Time' Password System Setup
The first time the system is used a default user name and password is available, the user
name is "Admin" and will have no password, this is known as the "first time" user. Access to
the first time user is removed once the password system has been configured. The first time
user is reinstated if the password system is reset.
The password system allows for user names to be typed in. All logging in and out activity is
automatically stored in the audit trail.
If your recorder is fitted with the ESS pasword system follow these instructions
First Time Password System Setup – Add System Administrator
Follow these steps on first time power up.
You have now added an Administrator User Level to the password system. You must now
give the new user a password
142
ESS - Extended Security System (CFR21 Part 11)
Your recorder is configured with ESS – Extended Security System.
This is a password system that cannot be switched off
Administrator User name
1. Switch the recorder On
2. From the process screen press the Menu button in the top left of the
screen and select the Log In icon in the top right as shown here.
3. A box will appear and prompt you to enter a User name, enter Admin. This is the first
time user login. Access to the first time login is removed once the password system has
been configured. The first time user is reinstated if the password system is reset. No
password is required for first time login. No password is required for first time login.
4. From the Main menu press the following buttons:
Configure > Passwords > User Admin > Add User
Select "Blank User" and type in your new administrator user name
• Default User name minimum length is 4 characters. (Allows the use of alpha, symbol
and numeric characters, no spaces)
• Default User name maximum length is 20 characters
5. In the Add User menu your new user name will be displayed, select this (default Opera-
tor) and change the User Level to "Administrator". Select Finish and Commit.
6. A box will appear when you have successfully added a user, press OK
7. The recorder will return to the process screen.
Administrator Password
1. From the process screen press the Menu button in the top left of the
screen and select the Log In icon in the top right as shown here.
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Advertisement
Table of Contents
