Honeywell V4043A Manual page 12

V4043A,B,E,J; V4044A,B; V8043A,B,E,F,J; V8044A,B,E MOTORIZED VALVES
A
Fig. 13. Remove old powerhead from systems using new style valve bodies.
WIRING
Disconnect the power supply before connecting wiring to
prevent electrical shock or equipment damage.
All wiring must comply with local codes and ordinances.
Connections to the individual valves are shown in Fig. 14 and
15. See Fig. 16 through 22 for typical hookups.
If replacing a Taco, Dole, Flair or White Rodgers 3-wire valve
with a 2-wire V8043E or F, see Fig. 23 through 35. Check that
the pressure rating of the new valve is appropriate for the
application.
60-2133—10
MANUAL
OPENING
LEVER
12
B
TO
LINE
YELLOW
LEADS
MOTOR
AUXILIARY
SWITCH
Fig. 14. Typical wiring for V8043E, V8044E.
COVER
RETAINING
SCREW
M10161
THERMOSTAT
(TYPICALLY T87F)
TO CIRCULATOR
OR ANOTHER VALVE
RED LEADS
M5953