Other Operations; Switching Between Digital And Analog Audio (Input Mode); Enjoying The Digital Media Port (Dmport) - Sony HT-DDW5500 Operating Instructions Manual

Other Operations

Switching between
digital and analog audio
(INPUT MODE)
You can select the audio input mode setting
when you connect components to both digital
and analog audio input jacks on the receiver.
1
Press the input button.
You can also use INPUT SELECTOR on
the receiver.
2
Press AMP MENU.
"1-LEVEL" appears on the display.
3
Press V/v repeatedly to select
"5-AUDIO".
4
Press or b to enter the
menu.
5
Press V/v repeatedly to select
"IN MODE".
6
or b to enter the
Press
parameter.
7
Press V/v repeatedly to select
the audio input you want.
Audio input modes
x AUTO
Gives priority to digital audio signals when
there are both digital and analog
connections. If there are no digital audio
signals, analog audio signals are selected.
x ANALOG
Specifies the analog audio signals input to
the AUDIO IN (L/R) jacks.
Note
Some audio input modes may not be set up
depending on the input.
Enjoying the DIGITAL
MEDIA PORT
(DMPORT)
The DIGITAL MEDIA PORT (DMPORT)
allows you to enjoy sound from a network
system such as a portable audio source or
computer.
When you connect a DIGITAL MEDIA
PORT adapter (not supplied), you can enjoy
sound from the connected component on the
receiver.
For details, refer to the operating instructions
supplied with the DIGITAL MEDIA PORT
adapter.
Notes
• Do not connect an adapter other than the DIGITAL
MEDIA PORT adapter.
• Before connecting the cords, be sure to disconnect
the AC power cord.
• Do not connect or disconnect the DIGITAL
MEDIA PORT adapter while the receiver is turned
on.
• Depending on the DIGITAL MEDIA PORT
adapter, video output may not be possible.
• The DIGITAL MEDIA PORT adapters are
available for purchase depending on the area.
59 GB