Advertisement
Back / Home — Return to the previous screen.
Tap and hold to display a list of recently accessed screens
including the app's main menu.
ROUTES — Record vibration for a predetermined list of machine
locations.
MEASURE — Take an off-route recording such as spectrum
and waveform measurements.
SYNC — Send recorded data from the S1 Collector app
to System 1. Receive updated folder and route information from
System 1.
RECORD REVIEW — Conduct a quick onsite review of recordings
on the handheld.
DEVICES — Pair the handheld with a data collector and view information about the paired device.
SETTINGS — Set preferences for your industrial handheld, app, database, language and measurement
units.
Sync Data Using USB Tethering
1. Select SYNC
2. Select the USB option.
3. Connect the device to the computer hosting System 1* using a USB cable.
4. From the displayed message on the handheld, select OK. The app displays device settings.
5. In Tethering & portable hotspot, enable USB tethering.
6. Return to the S1 Collector application.
7. Use Instrument Mode in System 1* to sync data.
Refer to SCOUT200 Series Installation & Operation Manual, part number 109M1269-01.
8. When synchronization is complete, select Done.
Sync Data Using Wi-Fi
To sync data using Wi-Fi, the handheld and computer hosting System 1* must be on the same network subnet.
1. Select SYNC
2. Select Wi-Fi.
3. Use Instrument Mode in System 1* to sync data.
4. When synchronization is complete, select Done.
Sync Data with Remote Comms
SCOUT200 Series Installation & Operation Manual, part number 109M1269-01.
See
SCOUT200 Series Quick Start Guide
S1 Collector App – Main Buttons
from the S1 Collector app's main menu.
from the S1 Collector app's main menu.
Sync Data
to complete the synchronization.
4
Advertisement
