Step 2: Insert The Batteries Into The Remote; Step 3: Preset The Channels Automatically - Sony Trinitron KV-XF21M80 Operating Instructions Manual

Notes
• If you connect a monaural VCR, connect the yellow plug to
• If you connect a VCR to the ˘ (antenna) terminal, preset the signal
• When no signal is input to the connected video equipment, the TV screen
CAUTION
Do not connect the power cord until all other connections are complete;
otherwise, a minimal current leakage through the antenna and/or other
terminals to the ground could occur.
Step 2
Insert the batteries
into the remote
Note
• Do not use old batteries or different types of batteries together.
Step 3
Preset the channels automatically
Front of TV
ONE-PUSH AUTOMATIC PROGRAMING
Tips
• If you want to stop automatic channel presetting, press SELECT twice.
• If an unwanted channel has been preset or you cannot preset a particular
Note
• During automatic channel presetting, the TV screen displays either B/G, I,
Now You Are Ready. . .
To watch the TV, see page 11.
yellow jack) and the black plug to
output from the VCR to the program number 0 on the TV.
becomes blue.
1
2
ONE-PUSH AUTOMATIC PROGRAMMING
channel, preset your TV manually (see page 9).
D/K, or, M for the TV system (see page 8).
-L (MONO) (the white jack).
1
VHF LOW B/G
Using Your New TV
(the
1
5