Table of Contents
Advertisement
Help Guide
Digital Still Camera
DSC-RX0M2
Function Menu Set.
You can assign the functions to be called up when you press the Fn (Function) button.
MENU →
(Camera Settings2) → [Function Menu Set.] → set a function to the desired location.
1
To change the functions in the function menu (Function Menu Set.)
The following is the procedure for changing [Drive Mode] in the function menu to [Grid Line].
1.
MENU →
(Camera Settings2) → [Function Menu Set.].
2.
Select
(Drive Mode) from among the twelve functions in the function menu using the top/bottom/left/right
buttons, and then press the
3.
Press the left/right buttons until [Grid Line] is displayed. Select [Grid Line], and then press the
(Grid Line) will be displayed in the former location of
Related Topic
Using the Fn (Function) button
(Enter) button.
4-748-164-11(1) Copyright 2019 Sony Corporation
153
(Drive Mode) in the function menu.
(Enter) button.
Advertisement
Table of Contents
