Pioneer PDP-503CMX Product Training Manual page 64

Menu Mode
Setting automatic input switching
Using AUTO FUNCTION to detect the signal for the set input makes it possible to automatically switch to that input.
INPUT 4 cannot be selected if PDA-5002 is not mounted.
Factory preset
1 Select OPTION.
Screen 1
MAIN MENU
PICTURE SCREEN
POWE R
A U T O
A UD I O O
SELECT
• AUTO FUNCTION will not operate if set to OFF.
• When INPUT1 or INPUT4 is selected, when a signal to the selected input is detected, that input will be
automatically switched to. Thereafter, input will not be switched even if the INPUT button on the remote
control or plasma display is pressed. In addition, if there is no signal input after input has been switched with
AUTO FUNCTION, input will be restored to what it was before it was switched by AUTO FUNCTION.
64
: OFF
INPUT1
SET UP OPTION
:
C O N T R O L S T A ND A RD
:
F U N C T I O N OF F
U T : F I X D E
SET CHANGE MENU EXIT
2 Move the cursor to AUTO FUNCTION and use
the SET button to change the setting.
Each time the SET button is pressed, the setting
will change as follows: OFF = INPUT1 =
=···
#
INPUT4
Screen 2
MAIN MENU
PICTURE SCREEN
POWE R C O N
A U T O F U N C T
T
A UD I O O U
SELECT CHANGE
SET
INPUT1
SET UP OPTION
T R O L : S T A ND A RD
:
I O N OF F
:
F I X D E
EXIT
MENU