HDBaseT Transmitter/Distribution Amplifier HDC-TH401/201/101 <User Guide> Ver.2.0.0 Thank you for choosing our product. To ensure the best performance of this product, please read this user guide fully and carefully before using it and keep this manual together with the product for future reference as needed.
Page 2
HDMI Licensing Administrator, Inc. in the United States and other countries. The terms Anti-snow and Connection Reset are registered trademarks of IDK Corporation in Japan. All other company and product names mentioned in this manual are either registered trademarks or...
Page 3
Some information contained in this User guide such as exact product appearance, diagrams, menu operations, communication commands, and so on may differ depending on the product version. This User guide is subject to change without notice. You can download the latest version from IDK’s website at: http://www.idkav.com...
HDC-TH401/201/101 User Guide Safety Instructions Read and understand all safety and operating instructions before using this product. Follow all instructions and cautions as detailed in this document. Enforcement Symbol Description Indicates the presence of a hazard that may result in death or serious...
Page 5
● Do not repair, modify or disassemble. Since the product includes circuitry that uses potentially lethal, high voltage levels, disassembly by unauthorized personnel may lead to the risk of fire or electric shock. For internal inspection or repair, contact your IDK Do not representative.
Page 6
Unplug If you continue to use the product under these conditions, it may increase the risk of electrical shock or fire. For maintenance and repair, contact your IDK representative. ● Unplug immediately if water or other objects are directed inside.
Page 7
HDC-TH401/201/101 User Guide Caution ■ For installing and connecting products: ● Do not place the product in a location where it will be subjected to high temperatures. If the product is subjected to direct sunlight or high temperatures while under operation, it may affect the product’s performance and reliability and may increase the risk of fire.
The HDC-TH401/201/101 (hereafter referred to as “HDC”) are HDbaseT transmitter and splitter with HDMI local output. HDMI signals are distributed up to 4. Video and audio signals can be extended using IDK’s HDBaseT extender. The HDC also supports audio de-embedding function.
HDC-TH401/201/101 User Guide 2 Features ■ Video ・ Up to 1080p/QWXGA (Reduced Blanking) ・ HDCP 1.4 ・ Up to 197 ft. (60 m) over Cat6 cable ・ Local monitor output ・ Anti-snow ■ Audio ・ De-embedding ■ Others ・ EDID emulation ・...
HDC-TH401/201/101 User Guide 3 Panels 3.1 Front panel ① ② [Fig. 3.1] Front panel drawing [Table 3.1] Front panel’s name and description (HDC-TH401/201/101) Name Description ① POWER switch and LED Powers on/off the HDC The POWER LED lights when the HDC is powered on.
HDC-TH401/201/101 User Guide 3.2 Rear panel ② ③ ④ ⑤ ⑥ ⑦ ⑧ ① [Fig. 3.2] Rear panel drawing (HDC-TH401) ② ③ ④ ⑤ ⑥ ⑦ ⑧ ① [Fig. 3.3] Rear panel drawing (HDC-TH201) ② ③ ④ ⑤ ⑥ ⑦...
Page 14
HDC-TH401/201/101 User Guide [Table 3.2] Front panel’s name and description (HDC-TH401/201/101) Name Description ① SIGNAL LED (SIGNAL) Illuminates when signal is input to HDMI INPUT. ② HDMI inpur connector Input connectors for HDMI signal to interface source devices, (HDMI INPUT) such as Blu-ray players.
HDC-TH401/201/101 User Guide 4 Application example Analog audio output Speakers HDC- TH401/201/101 HDMI(HDCP) HDMI(HDCP) Up to 16 ft. Up to 16 ft. (5 m) Transmitter (5 m) Blu-ray player Monitor HDC-RH401/201/101 DVI(HDCP) HDC-RD100-B Projector Up to 16 ft. (5 m)
HDC-TH401/201/101 User Guide 5 Precautions Before using, read this document. 5.1 Installation When installing the HDC, observe the following precautions. ・ Before connecting HDC or an external device, dissipate static electricity by touching grounded metal such as racks before handling signal cables. Failure to observe this precaution may result in ESD (electrostatic discharge) damage.
HDC-TH401/201/101 User Guide Fixing HDMI cable using cable clamp ① ② ③ ④ ⑤ Removing HDMI cable and cable clamp ① ② ③ ④ Pull out while pressing [Fig. 5.2] Attaching cable clamp 5.2.2 Connecting DVI cable Use a DVI/HDMI conversion cable for DVI connector of the source.
・ Cat5e/Cat6 UTP/STP can be used, however, we recommend a CAT.5E HDC cable* for the twisted pair cable which is developed by IDK to maximize quality of video transmission. ・ If using an STP cable, connect the FG connector to an earth ground source. Otherwise, the shielding feature does not work correctly.
Deep Color output from source device, please set Deep Color setting of the HDC, and then set the source device video settings. Factory default is 8bit/component (24bit/pixel). 8) Use IDK’s HDBaseT extender supporting DVI signals to transmit HDCP-compliant DVI signals. 9) If you got any trouble, see “9 Trouble shooting”.
HDC-TH401/201/101 User Guide 6.2 Menu operation Loosen two screws to remove the cover. [Fig. 6.1] Removing cover MENU + - STATUS READY ERROR 7-SEGMENT LED [Fig. 6.2] Menu operation buttons READY LED : Illuminates : EDID can be loaded and saved.
HDC-TH401/201/101 User Guide 6.3 Initialization Power the HDC while simultaneously depressing the SET button Keep pressing the “SET” button until the 7-SEGMENT LED is illuminated. Note that after returning to factory default, the previous setting values cannot be restored. Normal operation (display is OFF) ↓...
HDC-TH401/201/101 User Guide 7 Menus 7.1 Menu operation Step1 : Press the “SET” button. The 7-SEGMENT LED display menu number. Step2 : Select the menu number using the “ + ” and “ – ” buttons. Step3 : Press the “SET” button to apply the menu number.
HDC-TH401/201/101 User Guide 7.2 Menu list 1) Standard menu [Table 7.1] Menu number (Standard menu) Type Menu # Functions Page Copying EDID1 Copying EDID2 Copying EDID3 Setting EDID resolution Setting external EDID Setting Copy EDID Setting No-signal input monitoring time of Video signal...
Page 24
HDC-TH401/201/101 User Guide 2) Maintenance menu [Table 7.2] Menu number (Maintenance menu) Type Menu # Functions Page Setting forced output HDMI mode HDC OUTPUT Setting forced output HDMI mode OUTPUT1 Setting forced output HDMI mode OUTPUT2 Output Setting forced output HDMI mode OUTPUT3...
HDC-TH401/201/101 User Guide 7.3 Copying EDID Tip: “[ ]” shows each menu number in this chapter. EDID of sink devices can be read and stored. Use this feature in order to copy the EDID of another sink device. You can also use this feature in case the EDID of the connected sink device cannot be used.
Page 26
HDC-TH401/201/101 User Guide ・ Setting by menu Normal condition (OFF) ↓ SET Key “-” “+” button EDID copy data1 → select F01 EDID copy data2 → select F02, EDID copy data3 → select F03 ↓ SET button “-” “+” button select output connector [Default: 01: HDC OUTPUT] HDC OUTPUT →...
HDC-TH401/201/101 User Guide 7.4 Setting EDID resolution You can set EDID that is sent to a connected HDMI source device. EDID settings 3 to 22 sets the built-in EDID. EDID accured in “7.3 Copying EDID” and external EDID that is loaded from sink devices can be selected.
Page 28
HDC-TH401/201/101 User Guide EDID 3 to 22: Up to available maximum resolutions See “[Table 7.5] Supported resolution” for details. Select a resplution that can be output from the connected PC. [Table 7.4] The maximum resolution of EDID Setting Maximum resolution...
Page 30
HDC-TH401/201/101 User Guide ・ Setting by menu Normal condition (OFF) ↓ SET button “-” “+” button set INPUT EDID → select F10 ↓ SET button “-” “+” button select EDID number which you want to set. [Default: 3: 1080p] ↓ SET button During EDID copy is processing, READY LED is OFF.
HDC-TH401/201/101 User Guide 7.5 Setting external EDID You can set the HDMI output connector for when “External EDID” is selected in “7.4 Setting EDID resolution”. Set this menu before setting the EDID resolution to “EXTERNAL (External EDID)”. ・ Setting by menu Normal condition (OFF) ↓...
HDC-TH401/201/101 User Guide 7.6 Setting Copy EDID You can set the Copy data number (data acquired in “7.3 Copying EDID”) for when “Copy EDID” is selected in “7.4 Setting EDID resolution”. ・ Setting by menu Normal condition (OFF) ↓ SET button “-”...
HDC-TH401/201/101 User Guide 7.7 Setting No-signal input monitoring time of Video signal If you change the EDID settings of the HDC or power the HDC off/on, the source device may not output a video signal. Use this menu to set the monitoring time. This is the interval beginning when a source device is not outputting a signal;...
Page 34
HDC-TH401/201/101 User Guide ・ Setting by menu Normal condition (OFF) ↓ SET button “-” “+” button setting INPUT no-signal input monitoring time → select F16 ↓ SET button “-” “+” button select no-signal input monitoring time [Default: 10 sec.] OFF, 2 to 15: 2 sec. to 15 sec.
HDC-TH401/201/101 User Guide 7.8 Setting Deep Color You can set the Deep Color (color depth) that is output from the source device. This setting is applied if the source and sink devices are connected and “7.4 Setting EDID resolution” is set to a number of “3”...
HDC-TH401/201/101 User Guide 7.9 Setting PCM Audio You can set the PCM Audio that is output from the source device. Output cannot be OFF according to the HDMI standards. This setting is applied if the source and sink devices are connected and “7.4 Setting EDID resolution” is set to a number of “3”...
HDC-TH401/201/101 User Guide 7.10 Setting AC-3/Dolby Digital Audio You can set the AC-3/Dolby Digital Audio that is output from the source device. This setting is applied if the source and sink devices are connected and “7.4 Setting EDID resolution” is set to a number of “3”...
HDC-TH401/201/101 User Guide 7.11 Setting AAC Audio You can set the AAC Audio that is output from the source device. This setting is applied if the source and sink devices are connected and “7.4 Setting EDID resolution” is set to a number of “3” to “22 (Built-in EDID)”.
HDC-TH401/201/101 User Guide 7.12 Setting Dolby Digital + Audio You can set the Dolby Digital + Audio that is output from the source device. This setting is applied if the source and sink devices are connected and “7.4 Setting EDID resolution” is set to a number of “3”...
HDC-TH401/201/101 User Guide 7.13 Setting DTS Audio You can set the DTS Audio that is output from the source device. This setting is applied if the source and sink devices are connected and “7.4 Setting EDID resolution” is set to a number of “3” to “22 (Built-in EDID)”.
HDC-TH401/201/101 User Guide 7.14 Setting DTS-HD Audio You can set the DTS-HD Audio that is output from the source device. This setting is applied if the source and sink devices are connected and “7.4 Setting EDID resolution” is set to a number of “3” to “22 (Built-in EDID)”.
HDC-TH401/201/101 User Guide 7.15 Setting Dolby TrueHD Audio You can set the Dolby TrueHD Audio that is output from the source device. This setting is applied if the source and sink devices are connected and “7.4 Setting EDID resolution” is set to a number of “3”...
HDC-TH401/201/101 User Guide 7.16 Setting Audio channel You can set the number of channels for the multiple channel audio that is output from the source device. This setting is applied if the source and sink devices are connected and “7.4 Setting EDID resolution” is set to a number of “3”...
Page 44
HDC-TH401/201/101 User Guide ・ Setting by menu Normal condition (OFF) ↓ SET button “-” “+” button set INPUT audio channel → select F36 ↓ SET button “-” “+” button set the number of speakers [Default: 2: 2ch] 2: 2ch 3: 3 (2.1)ch 6: 6 (5.1)ch 8: 8 (7.1)ch...
HDC-TH401/201/101 User Guide 7.17 Setting EDID physical address copy This setting is applied if the source and sink devices are connected and “7.4 Setting EDID resolution” is set to a number of “3” to “22 (Built-in EDID)”. EDID physical address of the monitor that is connected to the OUTPUT connector (selected in “7.19 Selecting CEC”) is copied and then it is copied to the INPUT EDID.
HDC-TH401/201/101 User Guide 7.18 Setting audio output You can set audio output ON/OFF for each output connector. ・ Setting by menu Normal condition (OFF) ↓ SET button “-” “+” button select output connector which you want to set output audio ON/OFF HDC OUTPUT →...
HDC-TH401/201/101 User Guide 7.20 Selecting EDID WXGA If EDID resolution is set to “14 (WXGA 1360×768)” in “7.4 Setting EDID resolution”, select the number of pixels, 1360×768 or 1366×768. If 1360×768 is included in the maximum pixels, this menu setting is applied to the resolutions in the table below.
HDC-TH401/201/101 User Guide 7.21 Displaying firmware version ・ Setting by menu Normal condition (OFF) ↓ SET button “-” “+” button displaying firmware version → select F90 ↓ SET button Displaying firmware version (Ex: 1.00) ↓ SET button After processing, 7-SEGMENT LED goes back to menu.
HDC-TH401/201/101 User Guide 7.22 Setting maintenance menu display The maintenance menu is not displayed normally, but you can change the setting. 1) Maintenance menu [Table 7.9] Menu number (Maintenance menu) Type Menu # Function Page Setting forced output HDMI mode HDC OUTPUT...
HDC-TH401/201/101 User Guide 7.23 Setting forced output HDMI mode This menu is available if “7.22 Setting maintenance” is set to “ON”. The HDC transmitter determines whether the connected sink device is HDMI monitor or DVI monitor by acquiring sink device’s EDID. If the EDID cannot be acquired and the sink device is HDMI monitor, audio may not be output or other problem may occur.
HDC-TH401/201/101 User Guide 7.24 Setting HDCP input This menu is available if “7.22 Setting maintenance” is set to “ON”. Some source devices negotiate with the connected device to determine if HDCP encryption is supported. After this negotiation, the source device determines whether HDCP signal encryption is enforced or not. This process takes place with some source device, even if the content being presented is not copyright protected.
HDC-TH401/201/101 User Guide 7.25 Setting how long video output requests of sink device are ignored You can set the hot plug monitoring time. This menu is available if “7.22 Setting maintenance” is set to “ON”. Some DVI and HDMI devices detects hot plug signals for recognizing changes in connection. If a monitor that including the no-signal input monitoring fuinction is connected, it takes some time to output video.
HDC-TH401/201/101 User Guide 7.26 Setting output color conversion manually This menu is available if “7.22 Setting maintenance” is set to “ON”. You can set the color space that will be sent to the sink device The sink device automatically selects the appropriate color space according to the color space of the input video.
HDC-TH401/201/101 User Guide 7.27 Displaying status This menu is available if “7.22 Setting maintenance” is set to “ON”. Use this menu to find the cause of problem in case any problem occurs. ・ Setting by menu Normal condition (OFF) ↓ SET button “-”...
Page 55
HDC-TH401/201/101 User Guide [Table 7.12] Menu number (Status menu) (Cont’d) Type Menu # Function RGB/YCbCr of input signal No input signal YCbCr 444 YCbCr 422 For future use (not used) Input signal frequency No input 59.9Hz DDC power input status...
Page 56
HDC-TH401/201/101 User Guide [Table 7.13] Menu number (Status menu) (Cont’d) Type Menu # Function Dolby Digital + Audio DTS-HD Audi Dolby TrueHD Audio DST Audio WMA Audio HE-AAC/HE-AACv2/MPEG Surround Audio Input audio frequency No audio input 22.05kHz 24kHz 32kHz Input 44.1kHz...
Page 57
HDC-TH401/201/101 User Guide [Table 7.14] Menu number (Status menu) (Cont’d) Type Menu # Function Input audio status No input No audio input Searching input signal Searching input signal Input Searching input signal Searching input signal Searching input signal Correct input signal Connected monitor’s Deep Color support...
Page 58
HDC-TH401/201/101 User Guide [Table 7.15] Menu number (Status menu) (Cont’d) Type Menu # Function Connected monitor’s RGB/YCbCr support HDMI OUTPUT → L40, OUTPUT1 → L41, OUTPUT2 → L42, OUTPUT3 → L43, OUTPUT4 → L44 HDC-TH201 does not have L43 and L44.
Page 59
HDC-TH401/201/101 User Guide [Table 7.16] Menu number (Status menu) (Cont’d) Type Menu # Function Connected monitor’s HDCP support HDMI OUTPUT → L55, OUTPUT1 → L56, OUTPUT2 → L57, OUTPUT3 → L58, OUTPUT4 → L59 HDC-TH201 does not have L58 and L59 HDC-TH101 does not have L57, L58, and L59 No connection or monitor’s EDID read error...
This feature only works for the HDC’s output. If other devices are connected between the HDC’s output and sink device, this feature may be invalid. T568A or T568B straight connection. HDC.CAT5E cable is HDBaseT recommended cable which IDK developed. The maximum extension distance is the shorter one of transmitter/receiver/sink device connected to the HDC-TH101, 201, and 401.
HDC-TH401/201/101 User Guide 9 Trouble shooting In case this device does not work correctly, please check the following items first. ・ Are this device and the connected devices turned on normally? ・ Are cables connected correctly? ・ Are there no loose connections? ・...
Page 63
HDC-TH401/201/101 User Guide Problem Check item Page Video output Interference or noise Transmission clock of high-resolution signals and Deep Color appears on video. signals is faster than normal signals. If poor-quality or long cable is connected at the time of signal input or output, noise may appear on the video.
Page 64
HDC-TH401/201/101 User Guide Problem Check item Page Audio output Audio is output from If compressed audio (such as Dolby Digital, DTS, and so on) is HDMI output input, analog audio is not output. connectors but not The HDC supports only 2ch LPCM.