Connecting A Digital Tv Receiver - Sony KE-32TS2U, KE-42T2U Operating Instructions Manual

Connecting a Digital TV Receiver

Digital TV Set-top box
Disconnect all power sources before making any connections.
1
Using three separate component video cables, connect the Digital TV
Set-top box's Y, P and P
B
TV. Use the VIDEO IN 4 connection.
Note
DVI-HDTV connection or component video (Y, P
720p, and 1080i formats. Note that this TV displays all format types of picture in a resolution
of 852 dots × 1024 lines (KE-32TS2U), or 1024 × 1024 (KE-42TS2U).
2
Using an AUDIO cable, connect the Digital TV Set-top box's Audio
OUT jacks to the TV's AUDIO IN jacks.
Note
The Y, P and P jacks do not provide audio, so audio cables must be connected to provide
B R
sound.
Rear of TV
VIDEO IN 1
R AUDIO L VIDEO S VIDEO
VIDEO IN 2
AUDIO-R (red)
AUDIO-L (white)
RK-74A (not supplied)
Note
Select "Video 4 Mode" in the
depending on the Digital TV Set-top box you connect (see page 32).
Installing and Connecting the TV
jacks to the Y/G, P /B and P
R B
, P ) connection is necessary to view 480p,
B R
VIDEO IN 3 AUDIO OUT
R
R AUDIO L DVI-HDTV
R AUDIO L Y/G P /B P /R HD VD
B R
VIDEO IN 4
P /R
R
P /B
B
Y/G
VMC-10HG (not supplied)
(Initial Setup) menu, then select "Y/PB/PR" or "RGB"
/R jacks on the
R
VHF/UHF
L
AC IN
CONTROL
S IN
OUT
SUB
WOOFER
(US)
US
17