Digital Set-Up - Sony Bravia KDL-46X4500 Operating Instructions Manual

Lcd digital color tv
Hide thumbs Also See for Bravia KDL-46X4500:
Table of Contents

Advertisement

Digital Set-up

Digital Auto Tuning
Programme Sorting
Digital Manual Tuning Tunes the digital channels manually.
Subtitle Setting
Subtitle Language
Audio Type
Audio Filter
Improves the sound of individual channels when distortion
occurs in mono broadcasts. Sometimes a non-standard
broadcast signal can cause sound distortion or intermittent
sound muting in mono programmes.
If you do not experience any sound distortion, we recommend
that you leave this option to "Off" (factory setting).
~
• You cannot receive stereo or dual sound when "Low" or
"High" is selected.
Skip
Skips unused analogue channels when you press PROG +/–
to select channels. To select channels you have programmed
to skip, use the corresponding number buttons.
LNA
Improves the picture quality of the channel (noisy picture)
when the broadcast signal is very weak.
If you cannot see any improvement in the picture quality even
if you set to "On", set this option to "Off" (factory setting).
Colour System
Selects the colour system ("Auto", "PAL", "SECAM")
according to the channel.
Signal Level
Displays the signal level for programme currently being
watched.
Tunes in the available digital channels.
You can retune the TV after moving house, or to search for newly launched
channels.
Allows you to remove or change the order of digital channels stored in the TV.
1
Press F/f to select the channel you want to remove or move to a new position.
You can also select a channel by pressing the number buttons to enter its
three-digit channel number.
2
Remove or change the order of the digital channels as follows:
To remove a digital channel
Press
. After a confirmation message appears, press G to select "Yes", then
press
.
To change the order of the digital channels
Press g, then press F/f to select the new position for the channel and press G.
3
Press RETURN.
1
Press the number buttons to enter the channel number you want to tune, or
press F/f.
2
When the available channels are found, press F/f to select the channel you
want to store, then press
3
Press F/f to select the channel number where you want to store the new
channel, then press
Repeat the above procedure to tune other channels.
When set to "For Hard Of Hearing", visual aids for the hearing impaired are
displayed with the subtitles (when such visual aids are available).
Allows you to select the language of the subtitles.
Switches to broadcast for the hearing impaired when you select "For Hard Of
Hearing".
.
.
45
(Continued)
GB

Advertisement

Chapters

Table of Contents
loading

Table of Contents