Page 2
Hardware description ------------- 硬體介紹 Cabling descriptions --------------- 接線圖 Monitor OSD function description 畫面功能說明 Radio Adapter for Receiver/LCD module. 固定架安裝圖 GV-100TX Installation GV-100TX 安裝 Switching between NTSC & PAP system 信號格式(NTSC & PAL) Disclaimer of use: We sell products worldwide but regulations differs from country to country. The power output and/or frequency band may not always be legal within your country.
Page 3
Installation Hardware Description 安裝 硬體介紹 Attention M2x3 Install GV-100TX on aircraft 請注意 using the included adapter Channel 轉接板 bracket. Installation shown Frame adapter bracket 頻道 on 500X Quad Flyer. 安裝GV-100TX時可使用內附的 轉接板,將GV-100TX安裝至 機體上如下圖示意圖。 Audio out Video out Channel Selection/Set button 頻道切換鍵 Installation view 示意圖...
Page 4
Digital camera or GoPro have Operating Time). their own power supply. Otherwise it displays only It is not necessary to provide GAUI logo and the Channel power from GV-100TX. Number used. No need to connect the positive *Make sure your transmitter module would not (+) power cable to digital interfere the GPS system.