Mrc Control, True Convection, Warming Drawer, Steam Clean, Electric; Mrc Control, True Convection, Steam Clean, Electric - Whirlpool AER5522VAS0 Manual

MRC Control, True Convection, Steam Clean, Electric

MRC Control, True Convection, Warming Drawer, Steam Clean, Electric

1. Press "BAKE" for 5 seconds.
2. Press TEMP/TIME "+" or "-".
1. Press "BAKE" for 5 seconds.
2. Press TEMP/TIME "+" or "-".
3. Press START.
3. Press START.
1. Press CANCEL/CANCEL/START
2. Press the TEMP/TIME "+" key
1. Press CANCEL/CANCEL/START
2. Press the TEMP/TIME "+" key
When in the Diagnostic mode, instructions will be provided by the control to help you
through each of the programs. Press Cancel to exit the test at any time.
The "AUTO TEST" program will automatically test all the oven circuits. This test is very easy When in the Diagnostic mode, instructions will be provided by the control to help you
through each of the programs. Press Cancel to exit the test at any time.
to use and when the test is complete, test results will be provided. Whenever servicing the
oven, this is the test to run. The "AUTO TEST" program will automatically test all the oven circuits. This test is very easy
to use and when the test is complete, test results will be provided. Whenever servicing the
oven, this is the test to run.
When checking for fault codes and "NO FAULTS" is displayed, do not change the control.
When checking for fault codes and "NO FAULTS" is displayed, do not change the control.
MRC Convection, Electric
Temperature Adjustment
Temperature Adjustment
Diagnostic Mode
Action
Diagnostic Mode
Action
Press "+" again
"+" again
Press "+" again
"+" again
"+" again "+" again
"+" again "+" again
"+" again "+" again
"+" again
"+" again
"+" again
"+" again
*Press "START TIME" to clear all fault codes
*Press Start Time to clear all fault codes
*Press Start Time to clear all fault codes
Previous Offset shown, or U-00 is displayed.
Adjusts temperature in 5⁰F (3⁰C) increments
Previous Offset shown, or U-00 is displayed.
between -30⁰F (-18⁰C) and +30⁰F (+18⁰C).
Adjusts temperature in 5⁰F (3⁰C) increments
Bake and Broil Temperatures are offset
between -30⁰F (-18⁰C) and +30⁰F (+18⁰C).
automatically to the same degree.
Bake and Broil Temperatures are offset
If START is not pressed within 1 minute,
automatically to the same degree.
adjustment is ignored.
If START is not pressed within 1 minute,
adjustment is ignored.
Display
"TEST ON" ##⁰F "UO"
Display
"USAGE" (Displays hours of Operation)
"TEST ON" ##⁰F "UO"
"ENG MODE" (Manufacturing Information)
"USAGE" "TEST MODE" (Manual check of Control relays) (Displays hours of Operation)
"ENG MODE" (Manufacturing Information)
"VERSION" (Manufacturing Information)
"DISPLAY" "TEST MODE" (Manual check of Control relays) (Checks all LEDs in Display)
"VERSION" "CONTROL RESET" (Manufacturing Information) (Resets Control settings)
"FAULTS" "DISPLAY" (Checks all LEDs in Display) *(Displays all Fault Codes)
"AUTO TEST" (Performs a complete check of
"CONTROL RESET" (Resets Control settings)
the OVEN, automatically)
"FAULTS" *(Displays all Fault Codes)
"AUTO TEST" (Performs a complete check of
the OVEN, automatically)
2- 2
Models:
GFE461LVB0
GFE461LVQ0
GFE461LVS0
GFE461LVT0
YGFE461LVB0
YGFE461LVQ0
YGFE461LVS0
Models:
GFE471LVB0
GFE471LVQ0
GFE471LVS0
YGFE471LVB0
YGFE471LVQ0
YGFE471LVS0
(In the test mode)
(In the test mode)