Connections For An A/B Roll Editing System - Sony DSR-45/45P Operating Instructions Manual

Connections for an A/B Roll Editing System

The following is an example of a configuration of an
A/B roll editing system using the DSR-45/45P and a
recorder.
The purpose of the following figure is to clearly
DSR-45/45P (Player 1)
1
CH- CH-
1/2 3/4
MIN MAX
Player 2
Video signal
Audio signal
Reference video signal
Control signal
Note
Use a recorder equipped with a synchronization
function.
CH-1
Switcher
CH-2
CH-3
CH-4
Editing controller
Audio mixer
indicate the flow of signals among the component
devices in this system. The specific connections and
the recorder settings for this system are described on
the following pages.
Reference video
signal generator
Recorder
a)
Delay unit
a) When using a switcher, the phase of the video signals
processed by the switcher is delayed, which means that a
delay unit must be connected between the audio mixer's
output and the recorder's audio input.
Chapter 3 Using the Unit as a Player in an Editing System
Main video
monitor
Source video
monitor
Audio monitor
system
51
(GB)