Dvd Recording From Connected Equipment Without The Timer - Sony RDR-VX555 Operating Instructions Manual

Recording main and sub sounds
You can record the different soundtracks on a
DVD-RW (VR mode) or DVD-R (VR mode) from
equipment connected to the LINE 1 IN or LINE 2
IN jacks. When playing the disc, you can select
main or sub sound by pressing the AUDIO button.
Set "Line Audio Input" in "Audio" setup to
"Main/Sub" in the Setup Display (page 100).
When recording on other discs, select either sound
track with the connected equipment before
recording.
Unrecordable pictures
Pictures with copy protection cannot be recorded
on this recorder. Recording stops when a copy
guard signal is detected.
Copy control Recordable discs
signals
Copy-Free
+
RW
+
Copy-Once
- RW
Ver.1.1, Ver.1.2 with CPRM*
- R
Ver.2.0, Ver.2.1 with CPRM*
Copy-Never None
* The recorded disc can be played only on CPRM
compatible equipment (page 30).
Formatting a new disc
New, unformatted discs are automatically
formatted when first inserted in the recorder.
For DVD-RWs/DVD-Rs, you can select a
recording format (VR mode or Video mode)
according to your needs (page 30).
• Unused DVD-RWs are automatically formatted
according to the setting of "Format DVD-RW"
in "Features" setup (page 101).
• Unused DVD-Rs are automatically formatted in
Video mode. To format in VR mode, change the
recording format using the "Disc Setting"
display (page 67).
Notes
• You cannot mix VR mode and Video mode on the same
DVD-RW or DVD-R.
• You can change the recording format on DVD-RWs by
reformatting (page 67).
• You cannot change the recording format on used DVD-
Rs.
• The recorder records on new DVD-Rs in Video mode
unless you first format the discs in VR mode.
- RW - RW
VR
Video
- R - R
R
VR
Video
VR
VR
DVD Recording From
Connected Equipment
Without the Timer
+ RW - RW - RW
VR
Video
You can record TV programs on the recorder
through the connected cable box/satellite receiver.
Z OPEN/
CLOSE
DVD
1 1 2 2
4 4 5 5
7 7 8 8
0 0
DISPLAY
z REC
1
Turn on the recorder and the connected
cable box/satellite receiver.
2
Press DVD to operate the DVD recorder.
3
Press Z OPEN/CLOSE, and place a
recordable disc on the disc tray.
Recording side facing down
4
Press Z OPEN/CLOSE to close the disc
tray.
Wait until "LOAD" disappears from the front
panel display.
Unused discs are automatically formatted. For
the DVD-RW/DVD-R's recording format
(VR mode or Video mode), see "Formatting a
new disc" on page 47.
+ R - R - R
VR
Video
VIDEO
3 3
CH +/–
6 6
INPUT
9 9
H PLAY
x STOP
X PAUSE
REC MODE
,continued 47