Display Vxlan Tunnel - HP 6127XLG Series Command Reference Manual

Field
Flooding proxy
ACs
Link ID
State

display vxlan tunnel

Use display vxlan tunnel to display VXLAN tunnel information for VXLANs.
Syntax
display vxlan tunnel [ vxlan-id vxlan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vxlan-id: Specifies a VXLAN ID in the range of 0 to 16777215. If you do not specify a VXLAN, the
command displays VXLAN tunnel information for all VXLANs.
Examples
# Display VXLAN tunnel information for all VXLANs.
<Sysname> display vxlan tunnel
Total number of VXLANs: 1
VXLAN ID: 10, VSI name: vpna, Total tunnels: 4 (4 up, 0 down, 0 defect, 0 blocked)
Tunnel name
Tunnel0
Tunnel1
Tunnel2
MTunnel0
# Display VXLAN tunnel information for VXLAN 10.
<Sysname> display vxlan tunnel vxlan-id 10
VXLAN ID: 10, VSI name: vpna, Total tunnels: 4 (4 up, 0 down, 0 defect, 0 blocked)
Tunnel name
Tunnel0
Tunnel1
Description
Flood proxy state:
•
Enabled—Flood proxy is enabled. The VTEP sends broadcast, multicast, and
unknown unicast traffic to a flood proxy server through the tunnel. The flood
proxy server replicates and forwards flood traffic to remote VTEPs.
•
Disabled—Flood proxy is disabled.
ACs that are bound to the VSI.
AC's link ID on the VSI.
AC state:
•
Up.
•
Down.
Link ID State
0x5000000 Up
0x5000001 Up
0x5000002 Up
0x6002710 Up
Link ID State
0x5000000 Up
0x5000001 Up
11
Type Flooding proxy
Auto Disabled
Manual Disabled
Manual/Auto Disabled
Auto Disabled
Type Flooding proxy
Auto Disabled
Manual Disabled