Operation; Loading Paper Roll And Ink Ribbon; Handling The Paper Roll And Ink Ribbon - Sony UP-CX2 Operating Instructions Manual

Operation

Loading Paper Roll and
Ink Ribbon
Handling the paper roll and ink
ribbon
Notes
• The print pack contains two ink ribbons and two paper
rolls. Be sure to use the ink ribbon and paper roll in the
same carton as a set. (See "Ink Ribbon and Paper" on
page 22.)
• The ink ribbon and paper roll are not meant to be used up
completely. Even if there is some ink ribbon and paper
remaining, be sure to load a new ink ribbon and paper
roll as a set. Using leftover paper may result in
malfunction.
• Make sure to use a matching paper roll and ink ribbon
set. Using an unmatched combination will not only
prevent you from obtaining normal print results but may
cause a paper jam or a malfunction.
• Do not touch the printing surface of the paper roll or the
ink on the ink ribbon. Fingerprints and other pollutants
can lead to reduced print quality.
• The number of sheets that can be printed depends on the
print pack type. The table below lists the image count for
one ink ribbon and paper roll set.
Print 2UPC-C53
pack series
Number 360
of sheets
Print size 89 ×
127 mm
±2 mm
(3.5 × 5 in.
±3/32 in.)
8

Loading Paper Roll and Ink Ribbon

2UPC-C54 2UPC-C55 2UPC-C58
series series series
215 180 160
102 127 × 102 ×
×152 mm 178 mm 203 mm
±2 mm ±2 mm ±2 mm
(4 × 6 in. (5 × 7 in. (4 × 8 in.
±3/32 in.) ±3/32 in.) ±3/32 in.)
• Do not replace the ink ribbon and paper roll before they
are used up. Otherwise the above number of sheets may
not be achieved.
• Place the paper roll vertically. If you place the paper roll
horizontally, the paper roll may roll around and fall. This
may cause an injury.
• Hold the paper roll with both hands so that you do not
drop it, because it is heavy. Dropping may result in an
injury.
Hold the paper roll with both hands.
• If inserting the paper core into the paper roll is difficult
when loading the paper roll, squeeze the roll from both
sides to restore its shape.
Squeeze from both sides.
• Do not detach the black and white spools of the ink
ribbon until you start loading the ink ribbon.