Table of Contents
Advertisement
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
LINE:
COMPONENT OUT:
MODE
(PROGRESSIVE)
7
Press X/x to select the setting that
matches your TV type.
If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 67)
If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 67)
8
Press ENTER.
The Setup Display for selecting the type
of video signal output from the
COMPONENT VIDEO OUT jack
appears.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
LINE:
COMPONENT OUT:
MODE
(PROGRESSIVE)
If you intend to set "LINE" to "RGB" in
step 11, select "OFF."
9
Press X/x to select if you wish to
receive progressive video signals
or not.
Select "ON" only if you have made video
connection A (page 16) and wish to
view progressive video signals.
16:9
16:9
4:3 LETTER BOX
4:3 PAN SCAN
ON
AUTO
:
16:9
ON
JACKET PICTURE
VIDEO
ON
ON
:
OFF
10
Press ENTER.
The Setup Display for selecting the type
of video signal output from the LINE
(RGB)-TV jack appears.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
LINE:
COMPONENT OUT:
MODE
(PROGRESSIVE)
11
Press X/x to select the type of
signal you want to output from the
LINE (RGB)-TV jack.
If you set "LINE" to "RGB," you cannot
select "COMPONENT OUT." (The
player outputs no component video
signals.)
Video signals
• VIDEO (page 67)
S video signals
• S-VIDEO (page 67)
RGB signals
• RGB (page 67)
12
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
NO
16:9
ON
JACKET PICTURE
VIDEO
VIDEO
S-VIDEO
:
RGB
,continued
25
Advertisement
Table of Contents
