5-Tone Signaling; Making A Selcall (Selective Call ); Ransmitting Atatus Essage - Kenwood TK-7180 Instruction Manual

5-tone Signaling is enabled or disabled by your dealer. This function opens the
squelch only when the transceiver receives the 5 tones programmed in your
transceiver. Transceivers that do not transmit the correct tones will not be heard.
Note: Your transceiver functions include either 5-tone Signaling or FleetSync {page 15}, but not
both.
M S
AKING A ELCALL
A Selcall is a voice call to a particular station. To make a Selcall:
1 Select your desired zone and channel.
2 Press the key programmed as Selcall or Selcall + Status to enter Selcall
Mode.
3 Press the <B and C> keys to select the ID of the station you want to call.
• If programmed by your dealer, you can also use the
• Alternatively, you can enter a station ID using a DTMF keypad.
• If Manual Input Mode is enabled, you can enter digits by using a DTMF keypad or by
selecting digits with the
hold the S or DTMF
to select a digit. The cursor can be shifted to the left or right by pressing the <B or
C> key. Repeat this process until the entire ID is entered.
4 Press the key programmed as Call 1 to Call 6 to begin your call.
T S
RANSMITTING A
Status messages can contain up to 16 alphanumeric characters. To transmit a
Status message:
1 Select your desired zone and channel.
2 Press the key programmed as Status to enter Status Mode or Selcall +
Status to enter Selcall Mode.
• When using the Status key to enter Status Mode, the station ID is fixed and cannot
be selected. Skip to step 5 to continue.
3 In Selcall Mode, press the <B and C> keys to select the ID of the station you
want to call.
• If programmed by your dealer, you can also use the
• Alternatively, you can enter a station ID using a DTMF keypad.
• If Manual Input Mode is enabled, you can enter digits by using an optional DTMF
keypad or by selecting digits with the
first press and hold the S or DTMF
through the digits to select a digit. The cursor can be shifted to the left or right by
pressing the <B or C> key. Repeat this process until the entire ID is entered.
4 Press the S or DTMF

5-TONE SIGNALING

(S C
ELECTIVE ALLING
and keys. To enter manual input mode, first press and
key. When using the
M
TATUS ESSAGE
key to enter Status Mode.
)
and
and keys, cycle through the digits
and
and keys. To enter manual input mode,
key. When using the
keys.
keys.
and keys, cycle
13