Honeywell HTF1220 Series Owner's Manual

12" OSCILLATING TABLE FAN
Model HTF1220 Series
16" OSCILLATING STAND FAN
Model HSF1630 Series
IMPORTANT
SAFETY INSTRUCTIONS
READ AND SAVE THESE
SAFETY INSTRUCTIONS
BEFORE USING THIS FAN
When using electrical appliances,
basic precautions should always
be followed to reduce the risk of
fire, electric shock, and injury to
persons, including the following:
1. Use this fan only as described in this manual.
Other use not recommended may cause
fire, electric shock or injury to persons.
2. This product is intended for household
use ONLY and not for commercial,
industrial or outdoor use.
3. To protect against electric shock, DO NOT
place fan in window, immerse unit, plug or
cord in water or spray with liquids.
4. This appliance has a polarized plug (one blade
is wider than the other). To reduce the risk of
shock, this plug is intended to fit only one way
in a polarized outlet. If the plug does not fit
fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician.
DO NOT attempt to defeat this safety feature.
5. Close supervision is necessary when any
appliance is used by or near children.
6. Press the OFF button and unplug the fan
from the outlet when not in use, when moving
the fan from one location to another and
before cleaning.
7. To disconnect the fan, first press the
OFF button, grip the plug and pull it from
the wall outlet. NEVER pull by the cord.
8. DO NOT operate the fan in the presence
of explosive and/or flammable fumes.
9. DO NOT place the fan or any parts near an
open flame, cooking or other heating appliance.
10. DO NOT operate the fan with damaged cord or
plug or if the product malfunctions, is dropped
or damaged in any manner (see warranty).
11. Avoid contact with moving fan parts.
12. The use of attachments not recommended
by the manufacturer may be hazardous.
13. Place the fan on a dry, level surface.
14. DO NOT hang or mount fan on a wall or ceiling.
15. DO NOT operate if the fan housing is removed
or damaged.
16. A loose fit between the AC outlet (receptacle)
and plug may cause overheating and a
distortion of the plug. Contact a qualified
electrician to replace loose or worn outlet.
17. DO NOT run fan cord under carpeting. DO NOT
cover cord with throw rugs, runners, or similar
coverings. DO NOT route cord under furniture
or appliances. Arrange cord away from traffic
areas and where it will not be tripped over.
WARNING:
To Reduce The Risk of Fire or
Electric Shock, DO NOT Use This Fan With
Any Solid-State Speed Control Device.