Remote Controller - Fujitsu AB12 Service Manual

WIRED REMOTE CONTROLLER
1. DIP SWITCH 1
1
Remote controller address 1
FINAL REMOTE CONTROLLER SWITCH
SW1-1
OFF
ON
2
Indoor unit connection.
This is switched according to No. of connected indoor unit.
No. INDOOR UNIT CONNECTION SWITCH
SW1-2
OFF
ON
3 Remote controller address1,2.
Used for setting of the remote controller address. Set the addresses by ordering MASTER
without any space.
REMOTE CONTROLLER ADDRESS 1,2 SWITCH
SW1-3
OFF
OFF
4 SW1-5 and SW1-6 setting are forbidden.
2. DIP SWITCH 2
1 Cooling only / heat pump.
Switching cooling only / heat pump is set with SW2-1.
COOLING ONLY / HEAT PUMP SWITCH
SW2-1
OFF
ON
2
Auto change over validity / invalidity.
Auto change over validity / invalidity is set with SW2-2.
AUTO CHANGEOVER SWITCHING
SW2-2
OFF
ON
Terminator
NO
YES
Number of indoor unit
One unit connection
Multiple unit connection
SW1-4 Method
OFF Master
ON Slave
Operation system
Heat pump
Cooling only
Auto restart
Invalidity
Validity
Ð 12 Ð
– 36 –
SLAVE