MITSUBISHI CONFIGURATION STUDIO
5.8
Restore Factory Settings
The interface card (connected via USB) can be restored to the factory settings. Note that the filesystem
will be reformatted, which will destroy all custom modifications and configurations. Please backup the
configuration before executing this feature. The factory settings can be restored by:
Right-clicking on the device in the Project panel and choosing Restore Factory Settings.
•
Selecting the device in the Project panel and navigating to Restore Factory Settings.
•
5.9
Diagnostic Object
Diagnostic objects are optional and can only be added to specific protocol objects.
TX Counter
A 32-bit counter that increments when the driver transmits a packet.
RX Counter
A 32-bit counter that increments when the driver receives a valid packet.
RX Error Counter
A 32-bit counter that increments when the driver receives an error response packet, or when an error
occurs upon reception of a packet.
76