Operation; Emptying The Bag - Toro Leaf Cart Operator's Manual

6. Install the flange (A) on the hose and the
flange (A) on the bag opening into the slot on the
front bag frame, ensuring that both flanges are
secured by the tabs on the frame.
A
7. Slide the strap on the back of the bag over the
rear frame.
Note: You should not have any extra parts.
2

Operation

Connecting the Vacuum
Hose
Connect the vacuum hose to a Toro blower/vacuum
(models 51569, 51573, 51591, and 51598).

Emptying the Bag

To empty the bag, complete the following:
1. Remove the vacuum hose and bag from the bag
frame.
2. Remove the vacuum hose from the bag.
3. Open the zipper in the bag to dump the contents.
4. Close the zipper before installing the bag onto the
m-6932
cart as described in Setup.
Important: Periodically examine the bag for wear or
deterioration. If you find any, replace the bag.
3352-188
m–6944