7. Pair to the reader on the device.
8. Scanned data should now be typed into the current application on the device.
Switch to Bluetooth SSP Mode
1. Delete existing pairings to the reader.
2. Launch the firmware downloader (Desktop Firmware Loader.)
3. Connect the reader to the computer via USB. The driver should install
4. Select Action > Reset Bluetooth to SPP mode (wait for the process to
5. Disconnect the reader from the computer.
6. Wake the reader by pulling the trigger. The blue LED will flash.
7. Pair to the reader on the device.
8. Launch an Application (e.g. RFID Explorer) to use the reader.
16
automatically and the downloader should prompt as the com port arrives and
select the com port automatically ("COMn arrived.)
complete.)
IH21 Bluetooth UHF RFID Reader