19/22/2 2 4-inch LCD Display Unit User Manual PN:G6AUM185000001...
Page 2
Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact us. This manual may contain several technically incorrect places or printing errors, and the content is subject to change without notice. The updates will be added into the new version of this manual. We will readily improve or update the products or described in the manual.
The content of this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Hikvision Digital Technology Co., Ltd. (Hikvision). Hikvision assumes no responsibility or liability for any errors or inaccuracies that may appear in the book.
Chapter2. Device Interfaces Interfaces Interfaces Interfaces Figure 2.1 Rear Panel of Device Interfaces Interfaces Interfaces Interfaces POWER IN Power Input Power Input Power Input VGA IN VGA Analog Signal Input VGA Analog Signal Input VGA Analog Signal Input HDMI Digital Signal Input HDMI IN HDMI Digital Signal Input AUDIO IN...
Chapter4. Basic Operation 4.1 Input Source Selection(optional) Turn on the display unit when the power supply is on and input source is confirmed. Press key of the remote controller to enter the menu ◄ as shown on the right. DS-D5019/22 /24inch LCD display unit includes 2 input sources as HDMI and VGA signal.
4.4 Main Menu 4.4.1 Image Settings Purpose: You can adjust the picture parameters by switching image modes and adjust the values of contrast, brightness, color temperature,auto adjust,color adjust. Steps: Press MENU key to enter the main menu interface as shown below. 2.
4.4.2 Image Adjustment Purpose: When the input source is selected VGA, you can adjust the VGA parameters. It is for adjusting VGA H position, V Position, clock and phase. Steps: 1. Press Menu key to enter the main menu interface. 2.
4.4.3 OSD Setting Purpose: You can set the language, blending and OSD duration of the menu. Steps: 1. Press MENU key to enter the main menu interface. 2. Press ◄ key twice and press MENU key to enter the【Language】interface, press ◄ or ► to switch the language you want.
4.4.4 Other Settings Purpose: You can set Mode,Audio Volume,Signal Source,Aspect Ratio,DCR. Steps: 1. Press MENU key to enter the main menu interface. 2. Press triple◄ key and press MENU key to enter the Mode interface, press ◄ or ► to switch the mode between PC/GAME/MOVIE.
4.4.5 Reset Setting Purpose: You can reset settings to the factory defaults. Steps: 1.Press MENU key to enter the main menu interface. reset settings to the factory defaults. 2.Press ◄ key 4 times and press MENU key to Figure 4.4.5 Reset Setting...