Printing - Sony UP-D72XRS Instructions For Use Manual

Digital imager
Hide thumbs Also See for UP-D72XRS:
Table of Contents

Advertisement

4
Close the tray cover and slide the paper tray into the
printer until it clicks into place.
Notes on storing the paper
• Do not leave the paper in direct sunlight or bright
room light. Store in a dark area at low temperature
(30°C (80°F) or lower) and low humidity. We
recommend storing the paper in a polypropylene
pouch in a cabinet.
• Do not allow any volatile organic solvent such as
alcohol to come in contact with the paper. Be careful
when storing the paper.
• Do not stack paper on or under a freshly developed
diazo copy sheet as this could cause the film to turn
black.
• Use the original package for storing unused paper.
10

Printing

Printing
Before printing
• Ensure that the printer is properly connected to the
computer (page 8).
• Ensure that the paper is properly loaded in the paper
tray (page 9).
Printer window display
1
Turn on the power of the printer and computer.
After a few seconds, the printer window display
should appear as shown here. When READY is
displayed, the printer is ready to print.
Note
Do not turn the computer on or off while it is
accessing a hard or other disk.
2
Send the image data from the computer and so on to
the printer, then enter the print command or press
the PRINT button of the printer.
1 While the printer is receiving image data from
the computer, the following message appears:
The data is stored in the memory of the printer.
2
1
Print quantity

Advertisement

Table of Contents
loading

Table of Contents