Operating Instructions
Options Menu
To access the Options menu, first open the Setup menu, then refer to the
following steps:
To Display
MENU
MENU
Cable
ON: Select if you are receiving cable channels with a CATV
cable.
OFF: Select if you are using a TV antenna.
After changing your cable settings, you will need to perform Auto Program.
Perform Auto Program whenever setting up your TV.
Auto Program
It will cycle through all available channels and program
receivable channels.
Tilt Correction Press F or
then press
30
To Highlight
Options
Cable: ON
Auto Program
Tilt Correction: 0
Move
Select
f
to correct any tilt of the picture from –5 to +5,
to activate.
To Select
MENU
End