Canon iR_ADV C351IF Service Information page 2

If the Right Cover Unit is the old type [A]: Proceed to 2) below.
If the Right Cover Unit is the new type [B]: Proceed to 4) below.
2) Remove the Lock Guide and then remove the sheet [1] from the Right Cover Unit.
3) Replace the Lock Guide to the new type included in the Inter Transfer Belt Kit. When replacing, remove the torsion spring [1]
from the old type and attach it to the new lock guide.
4) Replace the Inter Transfer Belt Assembly.
[Caution]
- If the Right Cover Unit is the new type, the lock guide does not need to be replaced.
- If the Right Cover Unit is the old type, the right cover may not open in some cases when replacing Inter Transfer Belt Assembly
only without replacing the lock guide with the new type.
B) To replace with Inter. Transfer Belt Assembly (FM1-A153-020)
Prepare 1 of the new type Inter. Transfer Belt Assembly (FM1-A153-020) and follow the directions below to replace with it.
[Countermeasure cut-in serial numbers in factory]
To be informed as soon as identified.
[Service parts]
No. Part number Description
2 of 3
Q'ty Fig No.
F00188-EN-2.00
F00188-EN-2.00