Av3 Output; Tv Speakers; Rgb Centring - Sony FD Trinitron KV-29XL71K Operating Instructions Manual

Introducing and Using the Menu System
Level 1
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
14 Menu System
Level 2 Level 3 / Function

AV3 OUTPUT

The "AV3 Output" option in the "Detail Set Up" menu allows
you to select the source to be output from the Scart
connector
any signal coming from the TV or from external equipment
connected to Scart connectors
or the front connectors
Detail Set Up
Noise Reduction:
Auto
AV3 Output: TV
To do this:

TV Speakers:

On

RGB Centring:

0
After selecting the option, press the b button. Then press
Picture Rotation: 0
PIP Input: AV1
the v or V buttons to select the desired output signal: TV,
PIP Position:
AV1, AV2, AV4, YC4 or AUTO.
OK
TV SPEAKERS
The "TV Speakers" option in the "Detail Set Up" menu
allows you to mute the TV speakers in order to listen to the
TV from an external amplifier connected to the audio
outputs on the rear of the TV set.
To do this: After selecting the option, press the b button.
Then press the v or V buttons to select Off. Finally press
the OK button to confirm and store.
Detail Set Up
To cancel this function later on, select "On" instead of "Off"
Noise Reduction: Auto
AV3 Output: TV
in the step above.
TV Speakers: On
RGB Centring: 0
Picture Rotation: 0
PIP Input: AV1
PIP Position:
OK
RGB CENTRING
When connecting an RGB source, such as a "PlayStation",
you may need to readjust the horizontal position of the
picture. In that case, you can readjust it using the "RGB
Centring" option in the "Detail Set Up".
To do this: While watching an RGB source select the "RGB
Centring" option and press the b button. Then press the v
or V buttons to adjust the centre of the picture between –10
and +10. Finally press the OK button to confirm and store.
Detail Set Up
Noise Reduction: Auto
AV3 Output: TV
TV Speakers: On
RGB Centring:
0
Picture Rotation: 0
PIP Input: AV1
PIP Position:
OK
3/ 3 so you can record from this Scart
S
4 or
S
If your VCR supports Smartlink, this procedure is not
necessary.
If you select "AUTO", the output signal will always be
the same one that is displayed on the screen.
If you have connected a decoder to the Scart socket
3/ 3 or to a VCR connected to that Scart
S
socket, please remember to set the "AV3 Output" to
"AUTO" or "TV" for correct unscrambling.
1/ 1 or 2/ 2
4 and 4.