Sony 3KD-32NX200U Quick Start Manual

KD-32NX200U
KD-36NX200U
Thank you for choosing this Sony
Trinitron Television.
This step by step guide will help you to:
Insert batteries into the remote control.
Connect the aerial to your TV.
Connect a video cassette recorder (VCR) to your TV.
Switch on your TV.
Tune your TV.
View TV programmes.
4-090-228-01
Checking the supplied
1
accessories
VIDEO TV
/ /
RF Loopthrough cable
PROG
MENU
Remote Control
Inserting batteries into
2
the remote control
1
Place a coin in the slot at the
bottom of the remote control.
Turn anti clockwise to release
2
the battery compartment.
Insert the batteries as
indicated in the battery
compartment.
Always remember to dispose of batteries in an environmentally friendly way.
3
Connecting an aerial only
RF loopthrough
cable (supplied)
1. Connect your existing aerial lead to the digital socket marked
the TV as shown.
2. Connect the supplied RF loopthrough cable from the socket marked
Batteries analogue socket marked
Connecting an aerial and VCR
Scart lead
(not supplied)
1. Connect your existing aerial lead to the digital socket marked
TV as shown.
2. Connect the supplied RF loopthrough cable from the lower socket marked
the TV to the RF IN socket on your VCR.
3. Connect a lead from the RF OUT socket of your VCR to the analogue socket
marked
4. Connect a scart lead from the socket marked
3
the scart socket on your VCR (refer to your VCR instruction manual).
Replace the battery compartment
5. Connect the VCR to the mains socket and switch on.
and lock in place by twisting the
coin clockwise in the slot.
6.
Insert a pre-recorded tape into the VCR and press the 'PLAY' button. This enables
the TV to locate and store the video channel during the 'Automatically tuning the
TV' procedure.

Connecting the TV

Existing
(SMARTLINK)
3 3 s
VCR
2
DVD
1 aerial lead
DIGITAL
OPTICAL OUTPUT
ANALOGUE
. . .
MODEM 5V 200mA
R/D/D/D L/G/S/I
on the rear of
.
RF lead
(not supplied)
VCR
on the rear of the
on the TV.
3 s 3 on the rear of the TV to
to the
on