Setup; Setup 1:Connect The Video Signal Cables - Sony S9 Manual

SDM-S53/S73
8
The illustration of the back of the monitor show here is the
SDM-S53.
SDM-S93
8
8 AC IN connector (page 7)
This connector connects the power cord (supplied).
9 HD15 (RGB) input connector
This connector inputs analog RGB video signals (0.700 Vp-p,
positive) and sync signals.
q; Cable holder (page 8)
This part secures cables and cords to the monitor.
6

Setup

Before using your monitor, check that the following items are
9
included in your carton:
• LCD display
• Power cord
• HD15-HD15 video signal cable
q;
• CD-ROM (utility software for Windows/Macintosh, Operating
Instructions, etc.)
• Warranty card
• Quick Setup Guide
Setup 1:Connect the video signal
Turn off the monitor and computer before connecting.
Notes
9
• Do not touch the pins of the video signal cable connector as this
might bend the pins.
• Check the alignment of the HD15 connector to prevent bending the
pins of the video signal cable connector.
q;
1 Slide up the back cover.
2
Tilt the display forward.
Connect a computer equipped with an HD15
output connector (analog RGB)
Using the supplied HD15-HD15 video signal cable (analog RGB),
connect the computer to the monitor's HD 15 input connector (analog
RGB).
Connect the computer according to the following illustrations.
cables