x
SE4710 Integration Guide
Notational Conventions
This document uses the following conventions:
•
Italics are used to highlight chapters and sections in this and related documents
•
Bullets (•) indicate:
• Action items
• Lists of alternatives
• Lists of required steps that are not necessarily sequential
•
Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists.
NOTE This symbol indicates something of special interest or importance to the reader. Failure to read the note
will not result in physical harm to the reader, equipment or data.
CAUTION
WARNING
Related Documents
•
PL3307 Decoder Integration Guide, p/n 72E-149624-xx
2
•
The I
C-Bus Specification, Version 2.1,
http://www.semiconductors.philips.com/acrobat/literature/9398/39340011.pdf
•
OmniVision OV9212 (mono) 1/4" CMOS WXGA Megapixel HD Sensor datasheet, http://www.ovt.com/.
(Refer to the OV9712 Datasheet, the color version of the OV9212.)
•
Molex connector specification, 54809 Series, http://www.molex.com.
•
Kyocera connector specification, 6841 Series, http://global.kyocera.com.
This symbol indicates that if this information is ignored, the possibility of data or material damage may
occur.
!
This symbol indicates that if this information is ignored the possibility that serious personal
injury may occur.