Xeleum Zephyr Gen2 Series Installation Manual

READ AND FOLLOW ALL
SAFETY INSTRUCTIONS
SAVE THIS GUIDE FOR FUTURE
REFERENCE
WARNING!
Risk of Electric Shock. Turn power
off before installation or servicing.
1) Suitable for Installation in wet locations (IP67 rated)
2) Follow all standards specified by the NEC for installation. Consult a local licensed
electrician or electrical contractor if you are unsure.
3) When using electrical equipment, basic safety precautions should always be followed.
Items such as gloves and protective eyewear are recommended.
4) DO NOT lift the fixture by its wires.
5) Always ensure the fixture is secure when mounted, temporarily or permanently, at any
height above ground.
6) These instructions do not purport to cover all details or variations in equipment nor to
provide every possible contingency to meet in connection with installation, operation,
or maintenance.
www.xeleum.com
Xeleum Lighting, LLC. 3430 Quantum Blvd. Boynton Beach, FL 33426 * Phone 954 617 8170 * Fax 954 571 9777 * www.xeleum.com
General Product Information
The Zephyr G2 Series of IP67 rated LED luminaires are
designed for pole mounting in outdoor open areas.
Their high energy efficiency and sleek appearance
make them an elegant replacement for traditional
shoebox lighting.
Unpacking
This fixture has been packed carefully with the intent to
prevent damage from occurring during shipment.
Inspect the contents to confirm.
Fixture Specifications
Input 100-277VAC. Max Dimensions (28x16x4.5)in. Max
Weight: 25lbs (Fixture), 29lbs (Packaged). IP67. ETL listed.
IMPORTANT ADVISORIES AND SAFEGUARDS
Zephyr Gen2 Series
LED Area Light Fixture
Installation Guide
Page 1 of 10