Samsung Q1 Ultra Series Service Manual page 4

- This Document can not be used without Samsung's authorization -
3. Disassemble and Assemble
Part
Main
System
Picture Description
1. Separate Audio cable and Mic cable from
connector
2. Separate 4 screws of DMB Module and DMB
Antenna.
1. Picture of separating DMB antenna and DMB
module.
2. Separate the 5 screws of Main Board.
1. Separate Sub_R, Sub_L, T-Con FPC.
*Caution
When separating FFC, be careful not to brake
of connector pin.
When assemble, assemble the T-Con FPC
exactly.
1. up side down the Maini Board and then
separate AUX Antenna cable.(Black cable)
*Caution
When assemble the AUX Cable, using tape for
exacting assemble.
3-2