Honeywell Galaxy Flex Installer Manual page 150

Communications [56]
max.) of message recipients.
2=Centre No. The phone number (22 digits max.) of the SMS centre. Each operator
has a different number.. Always use the full telephone number including the country code
for the centre number. Start the number with a
3=Format The option is:
1=SMS For mobile phones
4=Site ID A 16 character alphanumeric string used to identify the panel/site sending the
message.
USB [56.6]
û 1 = Format
û 1 = SIA (0-4)
2 = Microtech (Same as SIA format)
2 = Account No. (6 digits maximum)
SIA Format [56.6.1.1]
For details see Int Telecom SIA Format [56.1.01.2].
Microtech Format [56.6.1.2]
For details see Int Telecom Microtech Format [56.1.01.3].
Account No. [56.6.2]
This is the site identifier. Enter a unique account number (6 digits maximum).
Audio [56.7]
Use this option to setup Audio Transmission to allow audio verification of an alarm. Each
system zone can be assigned one audio channel, each with a maximum of three
microphones. Following an alarm transmission over PSTN, you can program the panel to
route recorded audio from the time of the alarm activation, and live audio, direct to the
Alarm Receiving Centre. The following options are available:
û 1 = Listen In
û 0 = Disabled
û 1 = Tel No. 1/2/3
2 = Tel No. 3
û 2 = Alarm Monitoring – Not used
û 3 = Dial In – Not used
û 4 = Audio Module
û 1 = Path (PSTN) (0 = Disabled, 1 = Enabled)
2 = Audio Channels – Channel No (0 = Disabled, 1 = Enabled)
5 = Pre-Alarm – Pre Listen Time 00 (0 to 10 sec)
150
in place of the zero.
1 = Trigger (1 = Status, 2 = Groups)
Galaxy Flex Installer Manual