Adjusting The Balance (Bal); Adjusting The Front And Rear Fader - Sony CDX-C8000R Operating Instructions Manual

Selecting the DSO
1
Press (SOURCE) to select a source (tuner,
CD, or MD).
2
Press (DSO) repeatedly to select the
desired DSO mode.
Each time you press (DSO), the mode
changes as follows.
B 1 B 2
To cancel the DSO mode, select "off."
After three seconds, the display returns to
the normal playback mode.
Adjusting the balance
(BAL)
You can adjust the sound balance from the left
and right speakers.
1
Press (SOURCE) to select a source (tuner,
CD, or MD).
2
Press (SOUND) repeatedly until "BAL"
appears.
3
Press either side of (SEEK/AMS) to adjust
the balance.
After three seconds, the display returns to
the normal playback mode.
32
B 3 B Wide
off b
Adjusting the front and
rear fader
1
Press (SOURCE) to select a source (tuner,
CD, or MD).
2
Press (SOUND) repeatedly until "F" for
the front speakers or "R" for the rear
speakers appears.
3
Press either side of (SEEK/AMS) to adjust
the volume of front/rear speakers.
4
Press (MENU) twice.
After three seconds, the display returns to
the normal playback mode.
Adjusting the cut-off frequency
and the output volume level for
the front/rear speakers
To match the characteristics of the installed
speaker system, you can adjust the output
volume level and the cut-off frequency of the
speakers.
Cut-off frequency
Frequency (Hz)
1
Press (MENU).
2
Press either side of (DISC/PRST)
repeatedly until "Front HPF" or
"Rear HPF" appears, then press (ENTER).