Introduction - GE Mini COM Express 10 Hardware Reference Manual

1 Introduction

Refer to PICMG COM.0 R2.1
COM Express Module Base
Specification, located at
www.picmg.org.
Introduction
For public disclosure
The mCOM10-L1500 is a miniature Computer-on-Module (mCOM) Type 10
single-board computer approximately the size of a credit card, based on an AMD
G-Series System-on-chip (SoC). It contains one channel of DDR3L 72-bit ECC memory
and all components necessary for the bootable host computer packaged as a super
component. The mCOM10-L1500 module is combined with a carrier board required to
provide power, and support I/O and startup. The mCOM10-L1500 provides a Gigabit
Ethernet interface, four lanes of PCI Express (PCIe), two Serial ATA (SATA) ports, eight
USB 2.0 host interfaces (two of which support USB 3.0), low-voltage differential
signaling (LVDS) flat-panel or embedded DisplayPort plus a Digital Display Interface
(DDI), LPC, SPI, SMBus, I 2
audio ports to the module connector.
This document describes the mCOM10-L1500 based on the PICMG COM Express
Module Base Specification. The module can operate in convection or conduction-cooled
environments, and uses a wide input-range main power rail (4.75 to 20 V), 5 V Standby,
and 3 V Real-Time Clock (RTC) battery power.
mCOM10-L1500
C, secure digital or general-purpose I/O, and high-definition
GFK-2896 Hardware Reference Manual 11