Shutter Timer/Lanmp-Change Time - Panasonic Aicure ANUP5255V2 Operation Manual

■Shutter Timer/Lamp-Change Time
With UV control OFF, press the "AUTO" button, and set the duration of UV irradiation (shutter "open"
time).
Subsequently, set the lamp-change time to display the "Change" message when the lamp life
approaches.
①Shutter timer
1
Call up the "Shutter Timer/Lamp-Change Time" screen.
Setting mode
Shutter timer
Lamp-change time
Back
▲ (Back) Moves to the option immediately above the
current option.
▼ (Next) Moves to the option immediately below the
current option.
SET (Go) Goes into the "Shutter Timer" screen.
Select "Shutter Timer/Lamp-Change Time" with the "▲" and
"▼" buttons, and press the "SET" button. Then the "Shutter
Timer" screen is called up. (The item is displayed inversely.)
2
Set the "Shutter Timer" indicated value ("open" time) with
the "▲" and "▼" buttons, and press the "SET" button.
[Setting range: 0001 to 5400 (s)]
Setting mode
Shutter timer
0005 sec
Up
▲ (Up) Increases the indicated value.
▼ (Down) Decreases the indicated value.
SET (Set) Determines the indicated value.
After the "Shutter Timer Setting Completed" message is
displayed, the "Lamp-Change Time" screen is called up. (The
item is displayed inversely.)
Aicure ANUP5255V2
Next Go
Down Set
Setting
33