Camshaft, Tappet And Shim - Suzuki Ignis Service Manual

CAMSHAFT, TAPPET AND SHIM

1. Intake camshaft
2. Exhaust camshaft
3. Shim
: Shim No. on it faces tappet side.
4. Tappet
5. Camshaft housing
6. Camshaft housing bolt
REMOVAL
1) Remove cylinder head cover and oil pan as previously out-
lined.
2) Remove timing chain cover referring to "TIMING CHAIN
COVER".
3) Remove timing chain referring to "TIMING CHAIN AND
CHAIN TENSIONER".
4) Loosen camshaft housing bolts in such order as indicated in
figure and remove them.
5) Remove camshaft housings.
6) Remove intake and exhaust camshafts.
ENGINE MECHANICAL (M13 ENGINE) 6A1-39
Tightening torque
Apply engine oil to sliding surface of each part.